Power Status - Rigol MSO2000A Series User Manual

Chapter 15 System Function Setting
11. Copies
Press this key to set the number of copies to be printed. Rotate the multifunction
knob
12. Invert
Press this key to set the print color invert to "ON" or "OFF" and the default is
"OFF".

Power Status

Connect the oscilloscope to AC power using a power cord and at this point, the
oscilloscope is energized. MSO2000A/DS2000A oscilloscope allows users to set the
power status of the oscilloscope after it is energized. Press Utility  PowerStatus
to set the power status to "Default" or "Open".
Default: after the oscilloscope is energized, press the power key at the front

panel to start the instrument.
Open: the instrument starts directly when it is energized.

Note:
off the instrument.
MSO2000A/DS2000A User's Guide
nd Quality Products Online at:
to select the desired number of copies. The range is from 1 to 999.
At this point, you can still press the power key at the front panel to turn
GlobalTestSupply
www. .com
sales@GlobalTestSupply.co
RIGOL
15-15