Rigol MSO2000A Series User Manual page 104

RIGOL
upper limit and Low Level denotes the trigger level lower limit. The trigger level lines
and trigger marks disappear after you stop rotating the knob for about 2 s.
The adjustment mode of the trigger level differs when different vertical window is
selected.

the "Up Level" changes accordingly and "Low Level" remains unchanged.

the "Low Level" changes accordingly and the "Up Level" remains unchanged.

During the adjustment, the "Up Level" and "Low Level" change accordingly.
Trigger Mode:
Press Sweep and select "Auto", "Normal" or "Single". For the details, please refer to
"Trigger Mode". The corresponding status light of the current trigger mode turns
on.
Trigger Setting:
Press Setting to set the trigger parameters (trigger holdoff and noise rejection)
under this trigger type.
5-16
nd Quality Products Online at:
: only adjust the upper limit of the trigger level. During the adjustment,
: only adjust the lower limit of the trigger level. During the adjustment,
: adjust the upper and lower limits of the trigger level at the same time.
GlobalTestSupply
www.
Chapter 5 To Trigger the Oscilloscope
MSO2000A/DS2000A User's Guide
.com
sales@GlobalTestSupply.co