Xstatus Video Layout Layoutfamily Remote; Xstatus Video Monitors; Xstatus Video Output Connector [N] Connected; Xstatus Video Output Connector [N] Connecteddevice Cec Devicetype - Cisco TelePresence SX20 Codec Reference Manual

Cisco TelePresence SX20 Codec

Introduction

xStatus Video Layout LayoutFamily Remote

Shows the remote screen layout family.
Requires user role: ADMIN, USER
Value space of the result returned:
String
Example:
xStatus Video Layout LayoutFamily Remote
*s Video Layout LayoutFamily Remote: "equal"
** end

xStatus Video Monitors

Returns the monitor layout mode.
Single: The same layout is shown on all monitors.
Dual: The layout is distributed on two monitors.
DualPresentationOnly: All participants in the call will be shown on the first monitor, while the
presentation (if any) will be shown on the second monitor.
Quadruple: The layout is distributed on four monitors, so that each remote participant and the
presentation will be shown on separate monitors.
Requires user role: ADMIN, USER
Value space of the result returned:
Single/Dual/DualPresentationOnly/Triple/TriplePresentationOnly/Quadruple
Example:
xStatus Video Monitors
*s Video Monitors: Single
** end
SX20 Codec API Reference Guide CE9.1, JUNE 2017.
D15316.07
About the API xConfiguration xCommand

xStatus Video Output Connector [n] Connected

Describes whether a device (for example a display) is connected to the output connector or not.
When a display enters standby mode, the endpoint may not be able to detect it. The connector
status will then return False/Unknown even if the display is physically connected.
True: A device is connected to the video output connector.
False: Nothing is connected to the video output connector.
Requires user role: ADMIN, INTEGRATOR, USER
Value space of the result returned:
True/False
Example:
xStatus Video Output Connector 1 Connected
*s Video Output Connector 1 Connected: True
** end

xStatus Video Output Connector [n] ConnectedDevice CEC DeviceType

Shows the type of CEC enabled device connected to the HDMI output the codec has detected.
This information is only available when the device connected to the HDMI output has the
CEC feature configured on and the codec has the configuration xConfiguration Video Output
Connector [n] CEC Mode set to on.
Requires user role: ADMIN, INTEGRATOR, USER
Value space of the result returned:
Unknown/TV/Reserved/Recorder/Tuner/Playback/Audio
Example:
xStatus Video Output Connector 1 ConnectedDevice CEC DeviceType
*s Video Output Connector 1 ConnectedDevice CEC DeviceType: TV
** end
185
API Reference Guide
xStatus xStatus Appendices
Copyright © 2017 Cisco Systems, Inc. All rights reserved.