Xstatus Networkservices Ntp Status; Peripherals Status; Xstatus Peripherals; Xstatus Peripherals Connecteddevice [N] Hardwareinfo - Cisco TelePresence SX10 Reference Manual

Cisco TelePresence SX10

Introduction

xStatus NetworkServices NTP Status

Returns the status of the endpoints synchronizing with the NTP server.
Unknown: State of the synchronization is unknown.
Synced: The system is in sync with the NTP server
Discarded: The NTP result has been discarded.
Value space of the result returned:
Unknown/Synced/NotSynced/Discarded
Example:
xStatus NetworkServices NTP Status
*s NetworkServices NTP Status: Synced
** end
Cisco TelePresence SX10 API Reference Guide CE8.2, SEPTEMBER 2016.
D15333.07
About the API xConfiguration xCommand

Peripherals status

xStatus Peripherals

Shows the top level overview of the peripherals status.

xStatus Peripherals ConnectedDevice [n] HardwareInfo

Shows hardware information about connected device.
Value space of the result returned:
String
Example:
xStatus Peripherals ConnectedDevice 1007 HardwareInfo
*s Peripherals ConnectedDevice 1007 HardwareInfo: "1122330-0"
** end

xStatus Peripherals ConnectedDevice [n] ID

Shows the MAC-address of the connected device.
Value space of the result returned:
String
Example:
xStatus Peripherals ConnectedDevice 1007 ID
*s Peripherals ConnectedDevice 1007 ID: "00:10:20:20:be:21"
** end

xStatus Peripherals ConnectedDevice [n] Name

Shows the product name of connected device.
Value space of the result returned:
String
Example:
xStatus Peripherals ConnectedDevice 1007 Name
*s Peripherals ConnectedDevice 1007 Name: "Cisco TelePresence Touch"
** end
158
API Reference Guide
xStatus xStatus Appendices
Copyright © 2016 Cisco Systems, Inc. All rights reserved.