Cable Specifications; Wiring Procedure - YOKOGAWA ZR402G User Manual

5.5.1

Cable Specifications

Use a 2-core or 3-core cable for this wiring. Depending on the number of input(s), determine
which cable to use.
5.5.2

Wiring Procedure

(1) M4 screws are used for the terminal of the converter. Each cable should be equipped with
the corresponding crimp contact.
(2) The ON/OFF level of this contact input is identified by the resistance. Connect a contact
input that satisfies the descriptions in Table 5.2.
Table 5.2
Resistance
Identification of Contact Input ON/OFF
Closed
200 Ω or less 100 kΩ or more
Open
<5. Wiring>
IM 11M12A01-04E 11th Edition : Jul. 19, 2017-00
5-6