History Of Calibration Time; Time; Software Revision; Operational Data Initialization - YOKOGAWA ZR402G User Manual

10.1.24

History of Calibration Time

The calibration-conducted dates and times for the past ten calibrations are stored in memory.
10.1.25

Time

The current date and time are displayed. These are backed up by built-in batteries, so no
adjustment is required after the power is switched off. The following shows an example of
displaying June 21, 2000, 3:06 p.m.
00.06.21
Figure 10.3
10.1.26

Software Revision

The revision (number) of the software installed is displayed.
10.2

Operational Data Initialization

Individual set data initialization enables you to return to the default values set at the time of
delivery. There are two types of initializations: an all set-data initialization and a parameter-code-
based initialization. Table 10.4 lists the initialization items by a parameter code, and default
values.
Table 10.4
Parameter code
F30
F31
F32
F33
F34
F35
F36
CAUTION
When Data in Group F are initialized by the parameter code of "F36", "F01" and "F02" and "F08"
and "F10" cannot be initialized.
Displayed alternately
Date-and-time Display
Parameter Codes for Initialization
Data to be initialized
All data
Data in Group A
Data in Group B
Data in Group C
Data in Group D
Data in Group E
Data in Group F
<10. Other Functions>
15.06
F10.3E.ai
IM 11M12A01-04E
10-7
11th Edition : Jul. 19, 2017-00