6.
Components
This chapter describes the names and functions of components for the major equipment of the
EXAxt ZR Integrated type Zirconia Oxygen/Humidity Analyzer.
6.1
ZR202G Zirconia Oxygen/Humisity Analyzer
Pipe support
Bolt
Figure 6.1
Probe
this part is inserted in the furnace.
Selectable of length from 0.4, 0.7,
1.0, 1.5, 2.0, 2.5 or 3.0m.
Metal O-ring
U-shaped pipe
Filter
Washer
Integrated type Zirconia Oxygen/Humidity Analyzer
<6. Components>
Terminal box,
Non explosion-proof
JIS C0920 / equivalent to IP44D.
Equivalent to NEMA 4X/IP66
(Achieved when the cable entry is
completely sealed with a cable
gland in the recirculation pressure
compensated version.)
Flange
used to mount the detector.
Selectable from JIS, ANSI,
DIN or JPI standard models.
Calibration gas
pipe opening
Contact
Screw
Sensor (cell)
Dust filter mounting screw
Probe
F6.1E.ai
IM 11M12A01-04E
11th Edition : Jul. 19, 2017-00
6-1