Table of Contents
Advertisement
Chapter 3 System Installation with the Content-
Server 3000 Series
Figure 3–21
shows a detail of the ContentDirector connections to network switches across two
sites.
10-GbE SFP+ Ports
1
3
5
7
9
11
13
15
2
4
6
8
10
12
14
16
0
ContentDirector
Site 1
Figure 3–21: ContentDirector and Network Switch Connections in Stretch Cluster
To connect ContentDirectors to network switches in a stretch cluster:
1. Starting with the ContentDirector at Site 1, connect a yellow fiber optic cable to NIC 3.
Connect the other end of the cable to an open port on the first network switch module at Site
2. This will be used for Private VLAN 1.
2. Connect a black fiber optic cable to NIC 2 on the ContentDirector at Site 1. Connect the
other end of the cable to an open port on the second network switch module at Site 1. This
will be used for Private VLAN 2.
3. Connect a white Ethernet cable to NIC 0 on the ContentDirector at Site 1. Connect the other
end of the cable to an open port on the first network switch module at Site 1. This will be
used for the Public VLAN.
4. Connect a blue Ethernet cable to NIC 1 on the ContentDirector at Site 1. Connect the other
end of the cable to an open port on the second network switch module at Site 1. This will also
be used for the Public VLAN.
5. For the ContentDirector at Site 2, connect a yellow fiber optic cable to NIC 3. Connect the
other end of the cable to an open port on the first network switch module at Site 2. This will
be used for Private VLAN 1.
6. Connect a black fiber optic cable to NIC 2 on the ContentDirector at Site 2. Connect the
other end of the cable to an open port on the second network switch module at Site 1. This
will be used for Private VLAN 2
7. Connect a white Ethernet cable to NIC 0 on the ContentDirector at Site 2. Connect the other
end of the cable to an open port on the first network switch module at Site 2. This will be
used for the Public VLAN.
8. Connect a blue Ethernet cable to NIC 1 on the ContentDirector at Site 2. Connect the other
end of the cable to an open port on the second network switch module at Site 2. This will also
be used for the Public VLAN.
For assistance with configuring a stretch cluster, contact Technical Support.
© 2017 Harmonic Inc. All rights reserved.
10-GbE SFP+ Ports
1
3
5
7
9
11
13
15
2
4
6
8
10
12
14
16
1
3
2
Fiber optic
network card
Connecting the Harmonic MediaGrid 3000 System Components
10-GbE SFP+ Ports
1
3
5
7
9
11
2
4
6
8
10
12
ContentDirector
91
10-GbE SFP+ Ports
13
15
1
3
5
7
9
11
13
14
16
2
4
6
8
10
12
14
1
3
2
0
Site 2
Harmonic MediaGrid Release 4.1
15
16
Fiber optic
network card
Advertisement
Table of Contents
Troubleshooting
