Harmonic MediaGrid Installation And Configuration Manual page 248

Chapter 8 Hardware Reference
Table 8–25: Gigabit Ethernet Add-in Card status LEDs
Activity (left)
10-Gigabit Ethernet Add-in Card LED
The two LEDs on the 10 Gigabit Ethernet add-in card indicate connection and network activity for
the right and left connector respectively. See
NOTE: The left LED is not readily visible when viewing the rear panel.
Figure 8–27: 10 Gigabit Ethernet Add-in Card LEDs
Table 8–26: 10 Gigabit Ethernet Add-in Card status LED
LED State
Off
Green (solid)
Green (blink)
© 2017 Harmonic Inc. All rights reserved.
LED LED State
Off
Green (solid)
Green (blink)
Power off, network cable unplugged
Active connection at 10 Gb/s.
Network data being sent or received.
Power off, network cables unplugged
Power on, active connection
Power on, network data being sent or
received
Figure 8–27 Table 8–26
and
2 x 10 GbE
Add-in Card LEDs
NIC State
248
ContentServer 3000
NIC State
for details.
Harmonic MediaGrid Release 4.1