Harmonic MediaGrid Installation And Configuration Manual page 311

Appendix A Legacy Hardware Platforms
Figure A–8: Rear View of ContentBridge 1000
Table A–10: ContentBridge 1000 Rear Panel Descriptions
Indicator, Button, or
Connector
1. Reset button
2. Soft Power button
3. Wink LED
4. Unused in a ContentBridge
5. Gigabit Ethernet port 0
6. Gigabit Ethernet port 1
7. Unit fan
60/50 Hz power
9. Power switch
Table A–11
provides descriptions of the Ethernet port status LEDs.
Table A–11: ContentBridge 1000 Ethernet Port Status
LED Color
Green/amber (left)
Green (right)
© 2017 Harmonic Inc. All rights reserved.
Restarts an unresponsive ContentBridge. Use only when directed
by Technical Support.
Use to control the motherboard power-on status, independent of
the physical power switch on the rear panel of the ContentBridge.
This may be used to power up the ContentBridge if it is still
unresponsive after turning on the physical power switch. Use only
when directed by Technical Support. Pressing this button during
normal operation may cause loss of data.
Blinks on when the unit is "winked" from the SystemManager
application.
Use for system communication and interfacing with selected
applications. Refer to
state.
Circulates air through the unit. Do not obstruct.
Use to provide power to the unit.
Use to turn the unit ON or OFF.
LED State
Off
Green
Amber
On
Blinking
311
Description
Table A–11
for a description of each LED
NIC State
10 Mbps
100 Mbps
1000 Mbps
Active connection
Transmit/receive activity
Harmonic MediaGrid Release 4.1
ContentBridge 1000