Harmonic MediaGrid Installation And Configuration Manual page 316

Appendix A Legacy Hardware Platforms
System Status LEDs
Figure A–14 and
2010B/C/D.
Yellow Power on
White Ethernet link OK
Red
Ethernet link problem
Yellow
White
Red
Figure A–14: ContentBridge 2010B/C/D Front Panel Indicators
Table A–17: ContentBridge 2010B/C/D Indicator Descriptions
10GigE port
Drive 0 status
Drive 1 status
Unused ports (turn off
after power on)
Figure A–15 and
the bezel removed. Note that your ContentBridge may differ somewhat from the one described
below.
© 2017 Harmonic Inc. All rights reserved.
Table A–17 detail the six system status indicators on the front of ContentBridge
10 Gigabit Ethernet Link
Hard Drive 0
Power on
Drive status OK
Drive warning or error
LED Color/State
Yellow
Red
White
Yellow
White
Red
Yellow
White
Red
Yellow
Off
Table A–18 detail the front panel view of a typical ContentBridge 2010B/C/D with
Unused
Hard Drive 1
Unused
Unused
Indicates the power is on.
Indicates a non-functional network connection.
Indicates the port is active (requires good
Ethernet link status).
Indicates Drive 0 is powered on.
Indicates disk status OK.
Indicates disk warning or error.
Indicates Drive 1 is powered on.
Indicates disk status OK.
Indicates disk warning or error.
Indicates the power is on.
Indicates system boot complete.
316
ContentBridge 2010B/C/D (High Bandwidth)
Yellow Power on
White Drive status OK
Red Drive warning or error
Description
Harmonic MediaGrid Release 4.1