Harmonic MediaGrid Installation And Configuration Manual page 242

Chapter 8 Hardware Reference
Symbol
5
6
Disk Drive Status LEDs
Refer to Figure 8–22
Harmonic MediaGrid Component Replacement Guide for instructions on replacing a failed drive.
LEDs
Figure 8–22: Disk Drive Status LEDs
Table 8–21: Disk Drive Status LEDs
LED
Green
© 2017 Harmonic Inc. All rights reserved.
LED Color/State
NIC 0 Flashing
Overheat/ Fan Fail Flashing
Solid
and Table 8–21 for information on the Disk Drive Status LEDs. Refer to the
Color/State
Solid
Off
Blinking
Indicates network activity on the NIC 0 port
Indicates fan failure
Overheat condition, which may be caused
by cables obstructing the airflow in the
system or the ambient room temperature
being too warm. Check the routing of the
cables and make sure all fans are present
and operating normally. Also check to make
sure that the chassis covers are installed.
Drive is powered on
No power is being provided to the drive
Drive is in use.
242
ContentServer 3000
Description
Description
Harmonic MediaGrid Release 4.1