Table of Contents
Advertisement
Chapter 8 Hardware Reference
Table 8–22: ContentServer 3000 Rear Panel Components
1. Power supplies
2. NVRAM card LEDs
3. Ethernet port: NIC 1
4. Ethernet port: NIC 0
5. System Heartbeat LED
6. BMC Heartbeat LED
7. KVM port
8. SAS port
9. Optional Ethernet cards:
Optional 2x10GbE Add in Card
Optional 4x1 GbE Add-in Card
Gigabit Ethernet Port (LAN1 and LAN2) LEDs
On each Ethernet port, the Activity LED flashes to indicate activity while the Link LED may be
green, amber or off to indicate the speed of the connection. Refer to
descriptions of the GbE port status LEDs.
© 2017 Harmonic Inc. All rights reserved.
Component
Dual, redundant power supplies provide power to the
system. For a description of the power supply LED
states, refer to
Power Supply
The NVRAM indicators provide information about the
status of the NVRAM card. For details, refer to
Card LEDs
NIC 1 provides Gigabit Ethernet connectivity.
NIC 0 provides Gigabit Ethernet connectivity as well as
a connection for the Baseboard Management Console
(BMC). For information about the BMC connection, refer
to
Connecting the ContentDirectors to a Network
Blinks to indicate power and normal functionality
Blinks to indicate that Baseboard Management Console
(BMC) is functioning normally. The BMC is a
troubleshooting utility, which can be accessed in the
event of system failure.
Allows you to connect a keyboard, video, and mouse
switch.
A Serial Attached SCSI port on each controller allows
you to connect to multiple ContentStores.
CAUTION: With Harmonic MediaGrid 4.0, SAS
cables are not hot-swappable. When replacing
or removing a SAS cable, you must first power
down the associated ContentServer controller
using SystemManager, replace or re-connect
the SAS cable, and then power on the
ContentServer controller by pressing the power
button on the front panel.
An optional 10 Gigabit Ethernet card with two ports is
available from Harmonic. For details on the LED states,
refer to
10-Gigabit Ethernet Add-in Card LED
An optional Gigabit Ethernet card with four ports is
available from Harmonic. For details on the LED states,
refer to
Gigabit Ethernet Add-in Card LEDs
245
ContentServer 3000
Description
LED.
Switch.
Figure 8–24
and
Table 8–23
Harmonic MediaGrid Release 4.1
NVRAM
for
Advertisement
Table of Contents
Troubleshooting
