Harmonic MediaGrid Installation And Configuration Manual page 46

Chapter 2 System Installation with the Content-
Server 4000 Series
To open a drawer:
1. Make sure the anti-tamper locks are not engaged. The red arrows on the locks will point
inwards if the locks are disengaged (see
them counterclockwise using a screwdriver with a Torx T20 bit.
Anti-tamper Locks
Figure 2–4: Anti-tamper Locks (shown disengaged)
2. Push the drawer latches inward and hold them.
3. Pull the drawer all the way out until it locks open.
Figure 2–5: Opening the Bottom Drawer
IMPORTANT: The drawer must not be left open for more than two minutes while the enclosure is
powered.
© 2017 Harmonic Inc. All rights reserved.
Rack Mounting the Harmonic MediaGrid 4000 Series System
Figure
1
46
2–4). Unlock them if necessary by rotating
2
Harmonic MediaGrid Release 4.1
1