Harmonic MediaGrid Installation And Configuration Manual page 306

Appendix A Legacy Hardware Platforms
Indicator, Button, or Connector
5. LCD display
6. USB connectors
7. Optical drive
8. Hard drive 0
9. Hard drive 1
10. Solid state drive
Drive Status LEDs
Figure 9–5
and
Drive-status Indicator (green and amber)
Drive-activity Indicator (green)
Figure 9–5: ContentDirector Drive Indicators
Table 9–6: Drive-status Indicator Pattern (RAID Only)
Drive-status Indicator Pattern
Blinks green two times per second
Off
Blinks green, amber, and off
Blinks amber four times per
second
Blinks green slowly
Steady green
Blinks green three seconds,
amber three seconds, and off six
seconds
© 2017 Harmonic Inc. All rights reserved.
Table 9–6
describe the drive indicators and their functions.
ContentDirector 1000E and High Performance ContentDirector 2000B
Displays system ID, status information, and system error
messages. The LCD lights blue during normal system
operation. The LCD lights amber when the system needs
attention, and the LCD panel displays an error code
followed by descriptive text.
Use to connect the front bezel.
Use for software installation.
Refer to Table 9–6 for a description of the indicator codes.
Available only in the High Performance ContentDirector
2000B.
Identify drive/preparing for removal
Drive ready for insertion or removal
Note
: The drive-status indicator remains off until all hard
drives are initialized after system power is applied. Drives
are not ready for insertion or removal during this time.
Drive predicted failure
Drive failed
Drive rebuilding
Drive online
Rebuild aborted
306
Description
Condition
Harmonic MediaGrid Release 4.1