Harmonic MediaGrid Installation And Configuration Manual page 269

Chapter 8 Hardware Reference
Figure 8–49: ContentStore 5840 and 5840A Drawer LEDs
Table 8–47: ContentStore 5840 and 5840A Operator's Panel LEDs and Components
Component
Sideplane OK/Power
Good
Drawer Fault
Logical Fault
Cable Fault
Activity Bar Graph
© 2017 Harmonic Inc. All rights reserved.
Sideplane OK/
Power Good
Drawer
Fault
Logical Fault
Cable Fault
Activity Bar
Graph
Green if the sideplane card is working and there are no
power problems.
Amber if a drawer component has failed. If a drive has
failed, an amber LED will be lit on the failed drive, and the
drive should be replaced (for details, see the Harmonic
MediaGrid Component Replacement Guide).
If the drives are OK, contact Harmonic Technical Support
to identify the failure.
Amber if there is a drive fault. Flashes amber if one or
more arrays are in an affected state.
Amber if the cabling between the drawer and the back of
the enclosure has failed. Contact contact Harmonic
Technical Support to resolve the problem.
Shows the amount of data I/O from zero segments lit (no
I/O) to all six segments lit (maximum I/O).
Description
269
ContentStore 5840 and 5840A
Harmonic MediaGrid Release 4.1