Harmonic MediaGrid Installation And Configuration Manual page 304

Appendix A Legacy Hardware Platforms
MediaGrid
Figure 9–2: ContentDirector Front Panel
Table 9–3: ContentDirector Front Panel Descriptions
Indicator, Button, or
Connector
1. Power indicator
2. Air vents
3. Status LEDs
System Status LEDs
Figure 9–3
and
NOTE: The status indicators on the bezel for the High Performance ContentDirector 2000B do not display
status for the solid state drive.
White Ethernet communications OK
Red Ethernet communications problem
Figure 9–3: ContentDirector Front Panel Indicators
© 2017 Harmonic Inc. All rights reserved.
1
2
A bright blue
front panel. This indicator also provides a "wink" function, which
allows you to identify a unit from the SystemManager application.
Allows airflow through the unit. For optimum airflow, do not
obstruct the air vents.
An array of six
following figure and table for descriptions of each status LED.
Table 9–4
detail the six system status indicators on the front of the ContentDirector.
NIC 0 Link
NIC 1 Link
NIC 2 Link
ContentDirector 1000E and High Performance ContentDirector 2000B
Description
power indicator
is provided across the top of the
status LEDs
is provided on the front panel. See the
NIC 3 Link
Hard Drive 0
Hard Drive 1
304
ContentDirector
White Ethernet communications OK
Red Ethernet communications problem
White Drive status OK
Red Drive error
Harmonic MediaGrid Release 4.1
3