Reset Saved-Configuration - H3C WX Series Command Reference Manual

Default Level
1: Monitor level
Parameters
None
Description
Use the display startup command to display the configuration file used at the current
system startup and the configuration file(s) to be used at the next system startup, and
also the enabled/disabled status of the Boot ROM access control function if the
function is supported on the device.
Related commands: startup saved-configuration.
Examples
Display the startup configuration file used at the current system startup and the one to
be used at the next system startup.
<Sysname> display startup
Current startup saved-configuration file:
Next startup saved-configuration file:
Table 9 display startup command output description
Field
Current Startup saved-configuration file
Next startup saved-configuration file

reset saved-configuration

Syntax
reset saved-configuration
View
User view
Default Level
2: System level
Parameters
None
Description
Use the reset saved-configuration command to delete the startup configuration file
saved on the storage medium of the device.
Description
The configuration file used for the current
startup
The configuration file used for the next startup
128
flash:/testcfg.cfg
flash:/testcfg.cfg