Display Users - H3C WX Series Command Reference Manual

display users

Syntax
display users [ all ]
View
Any view
Default Level
1: Monitor level
Parameters
all: Displays information about all user interfaces that the device supports.
Description
Use the display users command to display the information about the user interfaces
being used.
Use the display users all command to display the information about all the user
interfaces supported on the device.
Examples
Display the information about the user interfaces being used.
<Sysname> display users
The user application information of the user interface(s):
Idx UI
+ 1 VTY 0
2 VTY 1
Following are more details.
VTY 0 :
User name: admin
Location: 192.168.1.54
VTY 1 :
User name: admin
Location: 192.168.1.58
+ : Current operation user.
F : Current operation user work in async mode.
The above information shows that at present two users have logged in to the device.
One is from VTY 0 with the IP address of 192.168.1.54 and the other is from VTY 1 with the
IP address of 192.168.1.58.
Delay Type Userlevel
00:00:00 TEL 3
00:02:34 TEL 3
83