Ip Https Acl - H3C WX Series Command Reference Manual

Field
Basic ACL
Current connection
Operation status

ip https acl

Syntax
ip https acl acl-number
undo ip https acl acl-number
View
System view
Default Level
3: Manage level
Parameters
acl-number: ACL number, which ranges from:

100 to 199: WLAN ACL

2000 to 2999: basic IPv4 ACL
Description
Use the ip https acl command to associate the HTTPS service with an ACL.
Use the undo ip https acl command to remove the association.
By default, the HTTPS service is not associated with any ACL.
After the HTTPS service is associated with an ACL, only the clients permitted by the ACL
can access the device.
The HTTPS service can be associated with a WLAN ACL and basic ACL, and the two
types of ACLs will not overwrite each other. However, ACLs of the same type will
overwrite each other. If you execute the ip https acl command for multiple times to
associate the HTTPS service with the same type of ACLs, the HTTPS service is only
associated with the last specified ACL.
When the HTTPS service is associated with a WLAN ACL, the HTTPS service uses this ACL
to filter wireless clients only, and does not filter wire clients with this ACL.
Description
The basic ACL number associated with the HTTPS
service
The number of current connections
Operation status, which takes the following values:
 Running: The HTTPS service is enabled.
 Stopped: The HTTPS service is disabled.
186