Clock Timezone - H3C WX Series Command Reference Manual

Examples
For the daylight saving time in abc2 between 06:00:00 on 08/01/2007 and 06:00:00 on
09/01/2007 and from 06:00:00 08/01 to 06:00:00 on 09/01 each year after 2007, set the
system clock ahead one hour.
<Sysname> system-view
[Sysname]
09/01/2007 01:00:00

clock timezone

Syntax
clock timezone zone-name { add | minus } zone-offset
undo clock timezone
View
System view
Default Level
3: Manage level
Parameters
zone-name: Time zone name, a string of 1 to 32 characters. It is case sensitive.
add: Adds a specified offset to UTC time.
minus: Subtracts a specified offset from UTC time.
zone-offset: Offset to the UTC time, in the format of HH/MM/SS (hours/minutes/seconds),
where HH is hours in the range 0 to 23, MM is minutes in the range 0 to 59, and SS is
seconds in the range 0 to 59. The zeros in the argument can be omitted except for
indicating 0 hours.
Description
Use the clock timezone command to set the local time zone.
Use the undo clock timezone command to restore the local time zone to the default
UTC time zone.
By default, the local time zone is UTC zone.
After the configuration takes effect, use the display clock command to view the result.
The information such as log file and debug adopts the local time modified by time-
zone and daylight saving time.
Related commands: clock datetime, clock summer-time one-off, clock summer-time
repeating, and display clock.
clock summer-time abc2 repeating 06:00:00
165
08/01/2007 06:00:00