Startup Saved-Configuration - H3C WX Series Command Reference Manual

<Sysname> display startup
Current startup saved-configuration file: flash:/hmr.cfg
Next main startup saved-configuration file: flash:/aa.cfg
Next backup startup saved-configuration file: NULL
// The above information indicates that the main startup configuration file for the next
system startup is aa.cfg.
<Sysname> save
The current configuration will be written to the device. Are you sure? [Y/N]:y
Please input the file name(*.cfg)[flash:/aa.cfg]
(To leave the existing filename unchanged, press the enter key):startup.cfg
Validating file. Please wait............
Configuration is saved to device successfully.
<Sysname> display startup
Current startup saved-configuration file: flash:/hmr.cfg
Next main startup saved-configuration file: flash:/startup.cfg
Next backup startup saved-configuration file: NULL
// The output shows that the main startup configuration file for the next system startup is
changed to startup.cfg

startup saved-configuration

Syntax
startup saved-configuration cfgfile
undo startup saved-configuration
View
User view
Default Level
2: System level
Parameters
cfgfile: Configuration file name. The file must be a file with an extension .cfg stored in
the root directory of the storage medium.
Description
Use the startup saved-configuration command to specify a startup configuration file
(the configuration file to be used at the next system startup).
Use the undo startup saved-configuration command to configure the device to start up
with the null configuration; the factory configuration.
The specified file must be ended with a .cfg extension and saved in the root directory
of the storage medium.
131