Patch Run - H3C WX Series Command Reference Manual

Default Level
3: Manage level
Parameters
patch-location: A string consisting of 1 to 64 characters, It can be a root directory of a
storage medium or be in the format of "root directory + patch file name".
Description
Use the patch location command to configure the patch file location.
By default, the patch file location is flash:.
If you save the patch files to other storage media except the flash on the device, you
must specify the directory where the patch files locate with the patch-location
argument. Then the system loads the appropriate patch files in the specified directory.
The patch install command changes the patch file location specified with the patch
location command to the directory specified by the patch-location argument of the
patch install command. For example, if you execute the patch location xxx command
and then the patch install yyy command, the patch file location automatically
changes from xxx to yyy.
Examples
Configure the root directory of the CF card as the patch file location.
<Sysname> system-view
[Sysname] patch location cf:

patch run

Syntax
patch run patch-number
View
System view
Default Level
3: Manage level
Parameters
patch-number: Sequence number of a patch. The valid values of this argument
depend on the patch file used.
Description
Use the patch run command to confirm the running of the specified patch and all the
ACTIVE patches before the specified patch.
196