Display Current-Configuration - H3C WX Series Command Reference Manual

Location: 192.168.1.54
+ : User-interface is active.
F : User-interface is active and work in async mode.

display current-configuration

Syntax
display current-configuration [ [ configuration [ configuration ] | interface [ interface-
type ] [ interface-number ] ] [ by-linenum ] [ | { begin | exclude | include } regular-
expression ] ]
View
Any view
Default Level
2: System level
Parameters
configuration [ configuration ]: Specifies to display non-interface configuration. If no
parameter is used, all the non-interface configuration is displayed; if parameters are
used, display the specified information. For example:

isp: Displays the ISP configuration.

post-system: Displays the post-system configuration.

radius-template: Displays the Radius template configuration.

system: Displays the system configuration.

user-interface: Displays the user interface configuration.
interface [ interface-type ] [ interface-number ]: Displays the interface configuration,
where interface-type represents the interface type and interface-number represents
the interface number.
by-linenum: Specifies to display the number of each line.
|: Filters command output by specifying a regular expression. For more information
about regular expressions, see Basic System Configuration in the Fundamentals
Configuration Guide.

begin: Displays the first line that matches the specified regular expression and all
lines that follow.

exclude: Displays the lines that do not match the specified regular expression.

include: Displays all lines that match the specified regular expression.
169