Display Saved-Configuration - H3C WX Series Command Reference Manual

Parameters
None
Description
Use the display archive configuration command to display the information about
configuration rollback.
Examples
Display the information about configuration rollback.
<Sysname> display archive configuration
Location: flash:/archive
Filename prefix: my_archive
Archive interval in minutes: 120
Maximum number of archive files: 10
Saved archive files:
No. TimeStamp
1 Aug 05 2007 20:24:54
2 Aug 05 2007 20:34:54
# 3 Aug 05 2007 20:44:54
„#‟ indicates the most recent archive file.
Next archive file to be saved: my_archive_4.cfg
Table 8 display archive configuration command output description
Field
Location
Archive interval in minutes

display saved-configuration

Syntax
display saved-configuration [ by-linenum ]
View
Any view
Default Level
2: System level
Parameters
by-linenum: Identifies each line of displayed information with a line number.
FileName
my_archive_1.cfg
my_archive_2.cfg
my_archive_3.cfg
Description
Absolute path of the saved configuration files
Configuration file saving interval, in minutes.
If the automatic saving is disabled, this field is not
displayed.
125