Stopbits - H3C WX Series Command Reference Manual


600 bps

1200 bps

2400 bps

4800 bps

9600 bps

19200 bps

38400 bps

57600 bps

115200 bps
The transmission rate varies with devices and configuration environment.
Description
Use the speed command to set the transmission rate on the user interface.
Use the undo speed command to restore the default transmission rate.
By default, the transmission rate is 9600 bps.
NOTE:
 The command is only applicable to asynchronous serial interfaces (including AUX and
console ports).
 The transmission rate setting on the terminal must be the same as that on the device user
interface for communication.
Examples
Set the transmission rate on the user interface AUX 0 to 19200 bps.
<Sysname> system-view
[Sysname] user-interface aux 0
[Sysname-ui-aux0] speed 19200

stopbits

Syntax
stopbits { 1 | 1.5 | 2 }
undo stopbits
View
User interface view
96