H3C WX Series Command Reference Manual page 82

authentication mode and the physical location.

If the summary keyword is present, the command displays all the number and type
of user interfaces.
Examples
Display information about user interface 0.
<Sysname> display user-interface 0
Idx Type
F 0 AUX 0
+ : Current user-interface is active.
F : Current user-interface is active and work in async mode.
Idx : Absolute index of user-interface.
Type : Type and relative index of user-interface.
Privi: The privilege of user-interface.
Auth : The authentication mode of user-interface.
Int : The physical location of UIs.
A : Authentication use AAA.
L : Authentication use local database.
N : Current UI need not authentication.
P : Authentication use current UI's password.
Table 5 display user-interface command output description
Field
+
F
Idx
Type
Tx/Rx
Privi
Auth
Int
A
L
N
P
Tx/Rx Modem Privi Auth
9600 - 3
Description
The current user interface is active.
The current user interface is active and works in asynchronous mode.
The absolute number of the user interface.
The type and relative number of the user interface.
The speed of the user interface
Indicates the command level of a user under that user interface
The authentication mode for the users logging in through the interface,
uses one of the following, AAA (A), current user interface password (P),
local database (L), none authentication (N).
The physical location of the user interfaces
Uses AAA authentication mode, and the corresponding authentication
mode is scheme.
Uses local authentication (not supported at present)
No authentication is needed, the corresponding authentication mode is
none.
Authenticates the user using the password of the current user interface,
and the corresponding authentication mode is password.
82
Int
N -