Restrictions And Guidelines; Configuration Procedure - H3C WSG1840X Installation Manual

Restrictions and guidelines

•
Before you reboot the device, perform the following tasks:
Use the

save
Wireless Integrated Services Gateway Fundamentals Command Reference.
Use the

have specified the correct next-startup configuration files and startup software images. If the
main startup software image is corrupt or does not exist, a reboot failure will occur. To avoid
a reboot failure, use the
image. For more information about the
commands, see software upgrade commands in H3C WSG1840X Wireless Integrated
Services Gateway Fundamentals Command Reference.
•
The device will not reboot if a file is being accessed.

Configuration procedure

Rebooting the device immediately
Task
Reboot the device immediately.
Scheduling a reboot for the device
Task
Schedule a reboot.
command to save the running configuration. For more information about the
save
command, see configuration file management commands in H3C WSG1840X
display startup
boot-loader file
Command
reboot
Command
•
Schedule a reboot to occur at a
specific time or date:
schedule reboot at time
date
[ ]
•
Schedule a reboot to occur after a
delay:
schedule reboot delay
time
and
display boot-loader
command to specify a new startup software
display startup
force
[ ]
Remarks
Use either command.
By default, no reboot date or time or reboot
delay time is specified.
Available in user view.
The most recent configuration takes effect if
you execute the
a
t or
command multiple times.
5
commands to verify that you
and
display boot-loader
Remarks
Available in user view.
scheduler reboot
scheduler reboot delay