Display Rps; Display Schedule Reboot - H3C WX Series Command Reference Manual

The above information indicates that the last reboot type of the AC is Cold boot (cold
boot is to restart an AC by powering it on). (The display of Warm represents a warm
boot, which means to restart an AC by using the commands like reboot).

display rps

Syntax
display rps [ rps-id ]
View
Any view
Default Level
1: Monitor level
Parameters
rps-id: Displays the status of the specified RPS. The argument rps-id represents the RPS
number, which is 2.
Description
Use the display rps command to display status of the RPS.
NOTE:
Support for this command depends on your AC model.
Examples
Display status of the RPS of the AC.
<Sysname> display rps
RPS 2 State: Normal
The above output information indicates that RPS 2 works normally.

display schedule reboot

Syntax
display schedule reboot
View
Any view
Default Level
3: Manage level
147