Display Telnet Client Configuration; Header - H3C WX Series Command Reference Manual

[Sysname] user-group abc
[Sysname-ugroup-abc] authorization-attribute vlan 3

display telnet client configuration

Syntax
display telnet client configuration
View
Any view
Default Level
1: Monitor level
Parameters
None
Description
Use the display telnet client configuration command to view information about the
current Telnet client.
At present, the command displays the configuration information of the source IP
address or source interface of the Telnet client.
Examples
Display the current configuration information of the Telnet client.
<Sysname> display telnet client configuration
The source IP address is 1.1.1.1.

header

Syntax
header { incoming | legal | login | motd | shell } text
undo header { incoming | legal | login | motd | shell }
View
System view
Default Level
2: System level
Parameters
incoming: Sets the banner displayed when a Modem login user enters user view. The
access controller does not support Modem login.
legal: Sets the authorization banner.
27