Tftp - H3C WX Series Command Reference Manual

tftp

Syntax
tftp server-address { get | put | sget } source-filename [ destination-filename ] [ source {
interface interface-type interface-number | ip source-ip-address } ]
View
User view
Default Level
3: Manage level
Parameters
server-address: IP address or host name of a TFTP server.
get: Downloads a file in normal mode.
put: Uploads a file.
sget: Downloads a file in secure mode.
source-filename: Source file name.
destination-filename: Destination file name.
source: Configures parameters for source address binding.

interface interface-type interface-number: Specifies the source interface by its
type and number. The primary IP address configured on the source interface is the
source IP address of the packets sent by TFTP. If no primary IP address is configured
on the source interface, the transmission fails.

ip source-ip-address: Specifies the source IP address for the current TFTP client to
transmit packets. This source address must be an IP address that has been
configured on the AC.
Description
Use the tftp command to upload files from the local AC to a TFTP server or download
files from the TFTP server to the local AC.

If no destination file name is specified, a file is saved using the same name as that
on the remote FTP server to the current working directory of the user (namely, the
working directory where the tftp command is executed).

The priority of the source address specified with this command is higher than that
specified with the tftp client source command. If you use the tftp client source
command to specify the source address first and then with the tftp command, the
latter one is adopted.
70