Archive Configuration Max - H3C WX Series Command Reference Manual

.
%Created dir flash:/archive.
<Sysname> system-view
[Sysname]
my_archive

archive configuration max

Syntax
archive configuration max file-number
undo archive configuration max
View
System view
Default Level
3: Manage level
Parameters
file-number: The maximum number of configuration files that can be saved, which
ranges from 1 to 10. The value of the file-number argument is determined by the
memory space. Set a comparatively small value for this argument if the available
memory space is small.
Description
Use the archive configuration max command to set the maximum number of
configuration files that can be saved.
Use the undo archive configuration max command to restore the default.
By default, a maximum of 5 configuration files can be saved.
Because excessive configuration files occupy large memory space, you can use this
command to control the number of the files. After the maximum number of
configuration files is saved, the system deletes the oldest files when the next file is saved
(either automatically or manually). When you change the maximum number of
configuration files that can be saved, the exceeded files are not deleted. If the number
of the existing configuration files is larger than or equal to the newly configured upper
limit, the system deletes the oldest n files when the next file is saved, where n = the
current number - the newly configured number + 1, for example: if the number of
configuration files that have been saved is 7, and the newly configured upper limit is 4,
when there is a new configuration file to be saved, the system deletes 4 oldest files,
where 4 = 7-4+1.
archive configuration location flash:/archive
121
filename-prefix