Hotfix Configuration Commands; Display Patch Information - H3C WX Series Command Reference Manual

Hotfix configuration commands

12

display patch information

Syntax
display patch information
View
Any view
Default Level
3: Manage level
Parameters
None
Description
Use the display patch information command to display the hotfix information.
Examples
Display hotfix information.
<Sysname> display patch information
The location of patches: flash:
Slot Version
----------------------------------------------------------------------
0 RPE004
Table 20 display patch information command output description
Field
The location of patches
Slot
Version
Temporary
Common
Current
Running
Temporaty Common Current Active Running
0 1
Description
Patch file location. You can configure it using the patch
location command.
meaningless
Patch version. The first three characters represent the suffix of
the PATCH-FLAG; the subsequent three digits, if any, represent
the patch number. (The patch number can be read after the
patch is loaded.)
Number of temporary patches
Number of common patches
Total number of patches
Number of patches in the RUNNING state
1 0
191
Start-Address
1 0x310bd74