H3C WX Series Command Reference Manual page 47

Connected to 192.168.1.46.
220 FTP service ready.
User(192.168.1.46:(none)):ftp
331 Password required for ftp.
Password:
230 User logged in.
[ftp]undo passive
FTP: passive is off
[ftp] debugging
FTP: debugging switch is on
[ftp] get sample.file
---> PORT 192,168,1,44,4,21
200 Port command okay.
The parsed reply is 200
---> RETR sample.file
150 Opening ASCII mode data connection for /sample.file.
The parsed reply is 150
FTPC: File transfer started with the signal light turned on.
FTPC: File transfer completed with the signal light turned off.
.226 Transfer complete.
FTP: 3304 byte(s) received in 4.889 second(s), 675.00 byte(s)/sec.
[ftp]
Table 3 debugging command output description
Field
---> PORT
The parsed reply is
---> RETR
FTPC: File transfer started with the signal
light turned on.
FTPC: File transfer completed with the signal
light turned off.
Description
Give an FTP order, with data port numbers
being...
The received reply code, which is defined in
RFC 959.
Download the file
File transfer starts, and the signal light is
turned on.
File transfer is completed, and the signal
light is turned off.
47