Configuration Encrypt - H3C WX Series Command Reference Manual

After the above operation completes, the device backs up file test.cfg to TFTP server
2.2.2.2, where the file is saved as 192-168-1-26.cfg.

configuration encrypt

Syntax
configuration encrypt { private-key | public-key }
undo configuration encrypt
View
System view
Default Level
3: Manage level
Parameters
private-key: Encrypts a configuration file with a private key. The encrypted
configuration file can only be decrypted and recognized by the local device.
public-key: Encrypts a configuration file with a public key. The encrypted configuration
file can be decrypted and recognized by all devices supported the configuration file
encryption function.
Description
Use the configuration encrypt command to enable configuration file encryption.
Use the undo configuration encrypt command to restore the default.
By default, configuration file encryption is disabled. The current valid configurations are
directly saved to the configuration file.
With this feature enabled, a configuration file is encrypted every time before it is saved
(by the save command). Encrypted by a private key, a configuration file can be
decrypted and recognized only by the local device; encrypted by a public key, a
configuration files can be decrypted and recognized by all devices supporting this
feature.
NOTE:
Support for the command depends on the device model.
Examples
Configure to encrypt the configuration file with a public key before saving it.
123