Execute - H3C WX Series Command Reference Manual

Field
[ ]

execute

Syntax
execute filename
View
System view
Default Level
2: System level
Parameters
filename: Name of a batch file with a .bat extension. You can use the rename
command to change the suffix of the configuration file to .bat to use it as a batch file.
Description
Use the execute command to execute the specified batch file.
Batch files are command line files. Executing a batch file is to execute a set of
command lines in the file.

Do not include invisible characters in a batch file. If an invisible character is found
during the execution, the batch process will abort and the commands that have
been executed cannot be cancelled.

Not every command in a batch file is sure to be executed. For example, if a
certain command is not correctly configured, the system omits this command and
goes to the next one.

The configuration generated after a batch file is executed will not be backed up
to the standby main board automatically.

Each configuration command in a batch file must be a standard configuration
command, meaning that the valid configuration information can be displayed
with the display current-configuration command after this command is configured
successfully; otherwise, this command may not be executed correctly.
Examples
Execute the batch file test.bat in the root directory.
<Sysname> system-view
[Sysname] execute test.bat
Description
Indicates that the file is in the recycle bin.
105