Quit; Return - H3C WX Series Command Reference Manual

CTRL_X Delete all characters up to the cursor.
CTRL_Y Delete all characters after the cursor.
CTRL_Z Return to the user view.
CTRL_] Kill incoming connection or redirect connection.
ESC_B Move the cursor one word back.
ESC_D Delete remainder of word.
ESC_F Move the cursor forward one word.
ESC_N Move the cursor down a line.
ESC_P Move the cursor up a line.
ESC_< Specify the beginning of clipboard.
ESC_> Specify the end of clipboard.

quit

Syntax
quit
View
Any view
Default Level
0: Visit level (in user view)
2: System level (in other views)
Parameters
None
Description
Use the quit command to exit to a lower-level view. If the current view is user view, the
quit command terminates the current connection and reconnects to the device.
Examples
Switch from GigabitEthernet 1/0/1 interface view to system view, and then to user view.
[Sysname-GigabitEthernet1/0/1] quit
[Sysname] quit
<Sysname>

return

Syntax
return
View
Any view except user view
19