Installing The Load To The Slider - IAI ROBO Cylinder RCP2 Series Operating Manual

5.4

Installing the Load to the Slider

• Tapped holes are provided on the slider for installing the load. The method of clamping varies according to how
to mount the main body.
• In case of moving the main body with the slider secured, use the same tapped holes on the slider.
• Please use two reamed holes on the slider when repeatability of mounting and dismounting is required. When
fine adjustment of the squareness is necessary, use only one reamed hole to allow adjustment.
Sizes and depths of tapped holes and reamed holes on slider
Model Tap size Depth of thread
SA5C M4
SA6C M5
SA7C M5
SS7C M5
SS8C M8
HS8C M8
Tapped hole
Caution: When installing the load, do not allow adhesives, paints or other viscous substances to
attach to the stainless sheet. Also, avoid applying a concentrated force that will dent the
sheet. It may cause the slider to malfunction or damage the sheet.
40
A
9 mm 30 mm
9 mm 50 mm
10 mm 50 mm
10 mm 50 mm
10 mm 75 mm
10 mm 75 mm
B C
19 mm 26 mm
32 mm 31 mm
32 mm 39 mm
32 mm 32 mm
45 mm 45 mm
45 mm 45 mm
Reamed hole
Reamed hole size
4H7, depth 6 mm
5H7, depth 6 mm
5H7, depth 10 mm
5H7, depth 10 mm
8H7, depth 10 mm
8H7, depth 10 mm