Names Of Parts - IAI ROBO Cylinder RCP2 Series Operating Manual

Names of Parts

The names of the actuator parts are indicated below.
The left and right sides are indicated by looking at the actuator from the motor end with the actuator set down
horizontally. Front end means the side opposite the motor end.
1. Motor Coupling Type (Standard) RCP2
SA5C, SA6C, SA7C
Opposite
Motor End
SS7C, SS8C, HS8C
Opposite
Motor End
Front Cover
Caution: The cable directly connected to the actuator is not a robot cable even when
ordered with a robot cable option. When designing, please make sure not to give
repeated bending loads to this cable.
The robot cable is applicable only to the connecting cables.
12
Side Cover
Stainless Sheet
Front Cover
Base
Stainless Sheet
Right Side
Slider
Base
Cable Joint Connector
Right Side
Left Side
Actuator Cable
Bearing Housing
Slider
Motor Cover
Side Cover
Left Side
Actuator Cable
Bearing Housing
Motor Cover
Motor End Cap
Cable Joint Connector
Motor End Cap
Motor
End
Motor
End