B Terms - Siemens SINUMERIK 840D Programming Manual

04.00
A
B Terms
A
Alarms
B
Blank
Block
Block search
Boot
 Siemens AG 2000 All rights reserved.
SINUMERIK 840D/840Di/810D/FM-NC Programming Guide Cycles (PGZ) - 04.00 Edition
Important terms are listed in alphabetical order. The symbol "->"
precedes terms which are explained under a separate entry in this list
All -> messages and alarms are displayed on the operator panel in
plain text with date and time as well as the appropriate symbol for the
reset criterion. Alarms and messages are displayed separately.
Alarms and messages in the part program
Alarms and messages can be displayed directly from the part program
in plain text.
Alarms and messages from PLC
Alarms and messages relating to the machine can be displayed
directly from the PLC program in plain text. No additional function
block packages are required for this purpose.
Cycle alarms are within the no. range of 60000...69999.
The part used to start machining a workpiece.
A section of a -> part program terminated with a line feed. A distinction
is made between -> main blocks and -> subblocks.
The block search function allows selection of any point in the part
program at which machining must start or be continued. The function
is provided for the purpose of testing part programs or continuing
machining after an interruption.
Loading the system program after Power On.
Appendix
A
Terms
A-299