Operator Commands In The Help Display; Contour Input Support - Siemens SINUMERIK 840D Programming Manual

General
1
1.5 Cycle support in the program editor (SW 5.1 and later)

Operator commands in the help display

Paging backward in the documentation.
Paging
backward
Paging forward in the documentation.
Paging
forward
Enables the jump to another piece of text
Next
entry
included in the help display.
Enables the jump to a selected piece of
Jump to
text.
Zoom the text in the help window.
Zoom +
Reduce the text in help window.
Zoom -
Return to the cycle screenform.
Abort
help

Contour input support

Generate
contour
Starts the geometry processor
enabling the input of
continuous contour elements.
Contour
1st line
Contour
2nd line
Contour
3rd line
Other softkeys support the
contour definition as from
SW 5.
It consists of one or several straight lines with contour
transition elements in-between (radii, chamfers). Each
contour element may be preassigned by means of end
points or point and angle and supplemented by a free
DIN code.
1-42
SINUMERIK 840D/840Di/810D/FM-NC Programming Guide, Cycles (PGZ) - 04.00 Edition
12.97
08.99
1
 Siemens AG 2000 All rights reserved.