Siemens SINUMERIK 840D Programming Manual page 259

03.96
04.00
4
•
Press softkey "Cancel" to return to the next-higher
softkey menu without activating the function (no
data are then stored in the NC).
•
Select softkey "OK" to transfer all values to the
GUD in the NC.
•
Then retract the tool and move it to its starting
position.
•
Select "Automatic" and position the program pointer
using block search in front of the thread cycle call.
•
Start the program by pressing NC Start.
Special functions
You can delete values stored earlier by selecting
another softkey labeled "Delete".
If several spindles are operating in the channel, another
box is displayed in the screenform in which you can
select a spindle to machine the thread.
 Siemens AG 2000 All rights reserved.
SINUMERIK 840D/840Di/810D/FM-NC Programming Guide, Cycles (PGZ) - 04.00 Edition
4.9 Thread recutting (SW 5.3 and later)
Turning Cycles
4
4-259