Programming Example - Siemens SINUMERIK 840D Programming Manual

General 12.97
1 1
1.4 Cycle support in program editor (SW 4.3 and later)

Programming example

Cycle support for the cycle:
corresponds to the COM files SW4 MMC100 and
cycle support ASCII Editor MMC 102/103
Boring 1
//C6(CYCLE85)
(R///Retraction plane, absolute)[Retraction plane/RTP]
(R///Reference plane, absolute)[Reference plane/RFP]
(R/0 99999//Safety distance, without sign)
[safety distance/SDIS]
(R///Final drilling depth, absolute)[Final drilling depth/DP]
(R/0 99999/0/Final drilling depth relative to reference plane)[Final
drilling depth rel./,DPR]
(R/0 99999//Dwell at drilling depth)[Dwell BT/DTB]
(R/0.001 999999//Feedrate)[Feedrate/FFR]
(R/0.001 999999//Return feedrate)[Return feedrate/RFF]
 Siemens AG 2000 All rights reserved.
1-32
SINUMERIK 840D/840Di/810D/FM-NC Programming Guide, Cycles (PGZ) - 04.00 Edition