Configuring Input Screenforms For Parameter Assignment; Cycle Parameterization - Siemens SINUMERIK 840D Programming Manual

General
1
1.4 Cycle support in program editor (SW 4.3 and later)

1.4.3 Configuring input screenforms for parameter assignment

The SC.COM (Siemens cycles) and UC.COM (user
cycles) files provide the basis for configuring the
input screenform for parameter setting.
The syntax is identical for both files.
Explanation
The following is an example of the cycle header:
Name of the help display
Cycle name
//C6 (CYCLE85) Boring 1
//
C6
(CYCLE85)
Boring 1

Cycle parameterization

(R/0 2/1/Return plane, absolute)[return plane/RTP]
Start
Variable type
Delimiter
Value range
Delimiter
Value for preset
Delimiter
Long text
End
Start option
Short text
Delimiter
Text in bitmap
End option
Instead of limiting a value range, it is possible to define
individual values by enumeration.
1-30
Comments
Header detection for a cycle description
Name of the help display with a p added (C1 - C28 Siemens Cycles)
Name of the cycle. This name is also written to the NC program.
Comments (is not evaluated)
(
REAL
R
INTEGER
I
CHARACTER
C
STRING
S
/
Lower limit, blank, upper limit (e.g. 0 2)
/
one value (e. g. 1)
/
is output in the dialog line
)
[
appears in the parameter screenform
/
Parameter name
]
SINUMERIK 840D/840Di/810D/FM-NC Programming Guide, Cycles (PGZ) - 04.00 Edition
12.97
1
 Siemens AG 2000 All rights reserved.