Siemens SINUMERIK 840D Programming Manual page 13

04.00
0
Principle
Your SIEMENS 810D, 840D and FM-NC have been
designed and constructed to the latest standards of
technology and recognized safety rules, standards
and regulations.
Additional equipment
The applications of SIEMENS controls can be
expanded by adding special additional devices,
equipment and expansion units supplied by
SIEMENS.
Personnel
Only authorized and reliable personnel who have
been trained in the use of the equipment may be
allowed to handle the control. Nobody without the
necessary training must be allowed to operate the
control, even temporarily.
The corresponding responsibilities of personnel
who set up, operate and maintain the equipment
must be clearly defined and adherence to these
responsibilities monitored.
Behavior
Before the control is started up, the personnel who
are to work on the control must be thoroughly
acquainted with the Operator's Guides. The
operating company is also responsible for
constantly monitoring the overall technical state of
the control (noticeable faults and damage, altered
service performance).
 Siemens AG 2000 All rights reserved.
SINUMERIK 840D/840Di/810D/FM-NC Programming Guide Cycles (PGZ) - 04.00 Edition
Preface
0
Proper use
0-13