Machine Data; Relevant Machine Data - Siemens SINUMERIK 840D Programming Manual

General
1
1.3 Programming cycles

1.3.2 Machine data

The following machine data are used for the cycles.
The minimum values for these machine data are
given in the table below.

Relevant machine data

MD No. MD name
18118 MM_NUM_GUD_MODULES
18130 MM_NUM_GUD_NAMES_CHAN
18150 MM_GUD_VALUES_MEM
18170 MM_NUM_MAX_FUNC_NAMES
18180 MM_NUM_MAX_FUNC_PARAM
28020 MM_NUM_LUD_NAMES_TOTAL
28040 MM_NUM_LUD_VALUES_MEM
The machine data files are delivered with these
defaults by the machine manufacturer.
It is important to remember that a power ON must be
performed if these machine data are changed.
Axis-specific machine data MD 30200: NUM_ENCS
must also be noted with respect to cycle CYCLE840
(tapping with compensating chuck).
1-20
Minimum value
7
10
10
40
400
200
25
SINUMERIK 840D/840Di/810D/FM-NC Programming Guide, Cycles (PGZ) - 04.00 Edition
12.97
1
05.98
 Siemens AG 2000 All rights reserved.