Upgrading System Memory - Viglen Vig410p Manual

Upgrading the Memory Modules
CAUTION!!
Exercise extreme care when installing or removing DIMM modules to prevent
any possible damage. Also note that the memory is interleaved to improve
performance!!
To install DIMM:
1. Insert the desired number of DIMMs into the memory slots, starting with P1-DIMM
1A. For best memory performance, please install memory modules of the same type
and same speed on the memory slots as indicated on the tables below. (See the
Memory Installation Table on page 17.)
2. Insert each DIMM module vertically into its slot. Pay attention to the notch along the
bottom of the module to prevent inserting the DIMM module incorrectly.
3. Gently press down on the DIMM module until it snaps into place in the slot. Repeat
for all modules.
Figure 29: Installing Memory Modules
Vig410P Motherboard Manual
41