Viglen Vig410p Manual page 12

areas where noisy power transmission is present, you may choose to install a line
filter to shield the computer from noise. It is recommended that you also install a
power surge protector to help avoid problems caused by power surges.
WARNING!
To prevent damage to the power supply or Motherboard, please use a power supply
that contains a 24-pin and two 8-pin power connectors. Be sure to connect these
connectors to the 24-pin (JPW1) and the two 8-pin (JPW2, JPW3) power connectors
on the Motherboard for adequate power supply to your system. Failure in doing so
will void the manufacturer warranty on your power supply and Motherboard.
Super I/O:
The wide range of functions integrated onto the Super I/O greatly reduces the
number of components required for interfacing with floppy disk drives. It also
provides two high-speed, 16550 compatible serial communication ports (UARTs).
Each UART includes a 16-byte send/receive FIFO, a programmable baud rate
generator, complete modem control capability and a processor interrupt system.
Both UARTs provide legacy speed with baud rate of up to 115.2 Kbps as well as an
advanced speed with baud rates of 250 K, 500 K, or 1 Mb/s, which support higher
speed modems.
The Super I/O provides functions that comply with ACPI (Advanced Configuration
and Power Interface), which includes support of legacy and ACPI power
management through an SMI or SCI function pin. It also features auto power
management to reduce power consumption.
11
Vig410P Motherboard Manual