Security Settings - Viglen Vig410p Manual

Security Settings

The AMI BIOS provides a Supervisor and a User password. If you use both passwords,
the Supervisor password must be set first.
Supervisor Password
This item indicates if a Supervisor password has been entered for the system. "Not
Installed" means a Supervisor password has not been used.
Figure 67: Security Settings
User Password
This item indicates if a user password has been entered for the system. "Not Installed"
means that a user password has not been used.
Change Supervisor Password
Select this feature and press <Enter> to access the submenu, and then type in a new
Supervisor Password.
User Access Level (Available when Supervisor Password is set as above) Available
options are Full Access: grants full User read and write access to the Setup Utility,
View Only: allows access to the Setup Utility but the fields cannot be changed, Limited:
allows only limited fields to be changed such as Date and Time, No Access: prevents
User access to the Setup Utility.
Change User Password
Select this feature and press <Enter> to access the submenu , and then type in a new
User Password.
114
Vig410P Motherboard Manual