Managing Arrays - Viglen Vig410p Manual

Managing Arrays

Select this option to view array properties, and configure array settings.
To select this option, using the arrow keys and the <enter> key, select "Managing
Arrays" from the main menu as shown above.
Figure 45: Managing Arrays
Configuring Disk Drives
You may need to configure a disk drive before you can use it.
CAUTION!!
Configuring a disk may overwrite the partition table on the disk and may make
any data on the disk inaccessible. If the drive is used in an array, you may not be
able to use the array again.
Do not configure a disk that is part of a boot array. To determine which disks are
associated with a particular array, please refer to Viewing Array Properties.
76
Vig410P Motherboard Manual